Steel spring isolators are laterally stable even without any housing as they have the ratio of 1:1 approximately between the horizontal and vertical stiffness, and as the free standing type completes with neoprene acoustical friction pads (6mm thick) beneath the base plate. These open spring isolators consist of top and bottom load plate and adjustment bolt for levelling, which shall be rigidly bolted to the machineries. Spring should be designed to have the diameter not less than 80% of the one when it is compressed at rated load. Springs should be also designed to have a minimum additional 50% travel beyond rated deflection and safe solid stress.We Vibratek manufacture various s types of open spring mounts from 25mm deflection mountings with single and multiple springs and 50mm deflection mountings